 |
- clear sound and flashing light indicate Tempo
- user friendly buttons
- Tempo range: 30-250 times / min
- Volume Control: 4 steps
- Time Mode: 12-hour AM / PM display
- Accuracy: Tempo: within + /- 3%. Time Mode:
within + / - 30 seconds (monthly rate)
- metronome clips onto belt
- Functions: Memory back-up; clock
- Lithium battery CR2025, 1 piece (3V), included (When the battery is replaced
with a new one, the set tempo and time will be cancelled. After
replacing the battery; therefore, set the tempo and time again.)
- overall dimensions: 40 (W) x 57 (H) x 35 (D) mm
- Weight: approximately 30 g.
- gray
-
warranty: 1 year
|
Instructions:
Display and Button Operation
-
with each press of the MODE button, the METRONOME and TIME
modes are activated alternately
-
with each press of the POWER/TEMPO button in the METRONOME
mode, the display changes over in the following order: POWER
"OFF" display, TEMPO SOUND "ON" display, TEMPO SOUND
"OFF" display
-
Pressing the MODE button in any of the displays will change
over the mode to TIME
How To Use the Metronome:
-
POWER "OFF" Display: the tempo sound will
not beep and the display remains blank. Set the metronome in the POWER
"OFF" display while it is not in use, to save the battery.
-
TEMPO SOUND "ON" display: the tempo
indicator appears alternately on the right and left sides of the display in
the set tempo as the tempo sound beeps
-
TEMPO SOUND "OFF" display: The tempo
indicator appears alternately on the right and left sides of the display in
the set tempo, but the tempo sound will not beep.
How To Set the Tempo:
-
Press the POWER/TEMPO button to show the TEMPO SOUND
"ON" or TEMPO SOUND "OFF" display
-
Press the UP or DOWN button to set the desired tempo.
The tempo can be set within the range between 30 and 250 times per
minutes. With each press of the UP or DOWN button, one digit is
increased or decrease, respectively. The digits move quickly if the
respective buttons are kept pressed.
-
Note: If the UP and DOWN buttons are pressed at the
same time in the POWER "OFF" display, all the segments will light
up, and then, the metronome will return to the initial settings with the
tempo and time set at "30" and "AM 12:00" respectively
How to Set the Time:
-
Press the MODE button to activate the TIME mode
-
Press the DOWN button for 3 seconds to show the TIME SETTING
display. the hour digits start flashing.
-
Selection of the digits to be adjusted (flashing) can be
made in the following order with each press of the DOWN button (Hour>
Minutes)
-
Press the UP button to set the flashing digits
-
After the adjustments are completed, press the MODE button
to return to the TIME display
-
Note: The hour digits are set in the 12-hour
indication.
Caution: Do not use of
keep the metronome in the following places: A malfunction may
result. Places where the metronome is exposed to extremely high
temperatures such as direct sunlight, or near or on a heating unit, humid places
such as a bathroom, sink or wet floor, dusty places, places where the metronome
is subjected to strong vibrations
|
|
|